| Number of inputs |
36 in 4 banks of 9 channels with independent programmable thresholds (with Active probes). |
| Maximum sampling frequency |
500MS/s |
| GigaView |
1.5 GS/s on 36 channels with 1024 samples per channel |
| Minimun sampling frequency |
476S/s |
| Memory Depth |
1 Million samples, 2MS or 4MS (x 36) |
| Trigger Settings |
| Trigger Levels: |
31 |
| Edge Condition |
No Edge, Rising Edge, Falling Edge, Both Edges for all channels. |
| Level Condition |
Condition verified if the selected inputs are equal (or different) to the pattern that the user set. It is possible to disable the level condition making it ever verified. |
| Trigger Mode |
Edge AND Level; Edge OR Level; Edge THEN Level; Level THEN Edge; Trigger always, Never trigger. |
| Manual Trigger: |
It is possible to force the trigger event during the acquisition. |
| Mode and sampling frequency |
| Timing |
500 MHz , divisible per power of two up to 219 |
| State |
It is possible sampling an external clock that comes from different combinations of dedicated inputs: it can be used up to 4 inputs of the same bank or of different banks (using different thresholds) and it’s possible to set edge condition (rising, falling or both) or level condition. |
| Pretrigger |
The number of pre trigger samples is programmable from 1 to 100% of the memory depth. |
| Stop Acquisition |
It is possible to stop the acquisition and if the trigger event occurred, to read the acquired data. |
| Linking instruments |
| Description |
It is possible to connect up to 8 logic analyzers to multiply the number of available channels (up to 288 channels).
Connect your oscilloscope to AT-LA500 to make a unique Mixed Signal Tester. |
| Number of linkable instruments |
Up to 8 |
| Probes |
| Available probes |
html Probe, Active Probe Hiz, Passive Probe |
| Interface |
| PC interface |
USB 2.0,supports USB 1.1 |
| Power supply |
|
| Input power supply |
12 V |
| Power |
16W maximum |
| Dimensions and Weight |
| Dimensions (WxLxH)m |
17.3 x 27.3 x 6.7 cm |
| Weight |
700 g |
