德国koenig-pa公司 虹科首页 | 自动化首页 广州虹科电子科技有限公司
koenig首页 EtherCAT主站 EtherCAT Studio EtherCAT从站协议栈 运动控制 自动化 硬件 支持
首页 > 产品 > 硬件 > 分布式输入/输出模块

分布式输入/输出模块

分布式输入/输出模块可创建分布式控制系统,通过增加一些I/O信号实现技术目标和扩展PLC的功能。

这些模块也可以连接到我们的KPA EtherCAT 4CAN网关上。

另外:这些模块全部兼容以前的Selectron Systems AG生产的Selectron I/O-devices

4通道模拟信号输入模块VSAI-4

(fully compatible with Selectron AIC 701 produced by Selectron Systems AG) with 4 isolated analog inputs serves to receive signals of either direct current or direct voltage or both from sensors and transform them into numeric code through each of the four inputs. Data exchange with Master PLC is executed through a serial communication channel based on CAN-interface (ISO 11898). Control and communication scheme is galvanically detached from the output signals scheme.

 

Main technical characteristics of VSAI-4:

Parameter Value
Supply voltage, V Nominal: constant voltage +24
Tolerance range: constant voltage +18..30
Input signal type Analog
Output signal type Digital
Number of independently controlled outputs 4
Voltage range of input signals, V from 0 to +10
Current range of input signals, mA from 0 to 20
Maximum wattage, W 2,5
Operation temperature range from 0 to +55°С
Protection class rating IP40
Data transfer interface CAN (ISO 11898)
Data transfer maximum speed, Mbit/s 1
Fixing and mounting, mm DIN-rail, 35
Overall dimensions, mm 100х92х60
Maximum weight, g 230

4通道模拟信号输出模块VSAO-4

(fully compatible with Selectron AOC 701 produced by Selectron Systems AG) with 4 isolated analog outputs serves to form permanent signals of either direct current or direct voltage or both through each of the four independent outputs. Data exchange with Master PLC is executed through a serial communication channel based on CAN-interface (ISO 11898). Control and communication scheme is galvanically detached from the output signals scheme.

 

Main technical characteristics of VSAO-4:

Parameter Value
Supply voltage, V Nominal: constant voltage +24
Tolerance range: constant voltage +18..30
Input signal type Digital
Output signal type Analog
Number of independently controlled outputs 4
Voltage range of output signals, V from -10 to +10
Current range of output signals, mA from 0 to 20
Minimum voltage load resistance, kOhm 2
Maximum current load resistance, Ohm 300
Maximum wattage, W 2,5
Operation temperature range from 0 to +55°С
Protection class rating IP40
Data transfer interface CAN (ISO 11898)
Data transfer maximum speed, Mbit/s 1
Fixing and mounting, mm DIN-rail, 35
Overall dimensions, mm 100х92х60
Maximum weight, g 230

8通道分立式信号输入模块VSDI-8

(fully compatible with Selectron DIC 701 produced by Selectron Systems AG) serves to receive discrete signals from sensors through each of the eight inputs. Data exchange with Master PLC is executed through a serial communication channel based on CAN-interface (ISO 11898). Control and communication scheme is galvanically detached from the input signals scheme.

 

Main technical characteristics of VSDI-8:

Parameter Value
Supply voltage, V Nominal: constant voltage +24
Tolerance range: constant voltage +18..30
Input signal type Digital
Output signal type Digital
Number of independently controlled inputs 8
Voltage range of input signals, V from 0 to +24
Minimum level of logical “1”, V +14
Maximum level of logical “0”, V +5
Indication of output signal state LED
Maximum wattage, W 2,5
Operation temperature range from 0 to +55°С
Protection class rating IP40
Data transfer interface CAN (ISO 11898)
Maximum data transfer speed, Mbit/s 1
Fixing and mounting, mm DIN-rail, 35
Overall dimensions, mm 100х92х60 мм
Maximum weight, g 230

8通道分立式信号输出模块VSDO-8

(fully compatible with Selectron DOC 701 produced by Selectron Systems AG) serves to send discrete signals to the executing devices through each of the eight independently controlled outputs. Data exchange with Master PLC is executed through a serial communication channel based on CAN-interface (ISO 11898). Control and communication scheme is galvanically detached from the output signals scheme.

 

Main technical characteristics of VSDO-8:

Parameter Value
Supply voltage, V Nominal: constant voltage +24
Tolerance range: constant voltage +18..30
Input signal type Digital
Output signal type Digital
Number of independently controlled outputs 8
Maximum load current on one channel, A 0,5
Minimum load current, A 4
Minimum output level of logical “1”, V 18
Maximum output level of logical “0”, V 2
Maximum wattage, W 2,5
Operation temperature range from 0 to +55°С
Protection class rating IP40
Data transfer interface CAN (ISO 11898)
Data transfer maximum speed, Mbit/s 1
Fixing and mounting, mm DIN-rail, 35
Overall dimensions, mm 100х92х60
Maximum weight, g 230
Indication of output signal state LED
 
虹科 > 自动化 > 德国KPA公司 我们是以下协会的会员
EtherCAT主站协议栈
架构
主站核心
操作系统抽象层
基准

EtherCAT Studio
主站配置
从站配置
EtherCAT诊断
开发框架

 

EtherCAT从站协议栈
从站协议栈交付选项

EtherCAT运动控制
库分类
运动控制开发包
运动控制应用
在线轨迹生成

自动化开发平台
fastCenter
fastCenter Light

EtherCAT硬件
EtherCAT从站板卡
分布式输入/输出模块

支持

基础和高级培训课程




加关注




虹科是ethercat会员

关于虹科虹科积极进取,不断探索科技新领域。最优秀的员工和最好的技术能够接受最困难的挑战。为您找到最佳解决方案。虹科靠口碑赢得客户。

Email 新浪微博 论坛 点击发送消息给我

北京:010-5781 5040 | 上海:021-6728 2707 | 西安:029-8187 3816 | 广州:400 999 3848 | 成都 028-6138 2617

sales@hkaco.com | 广州虹科电子科技有限公司 | 版权所有 | 广州科学城润慧科技园C栋6层